TOPAZ STUDIO COMPUTER MANUAL HOW TO
TOPAZ STUDIO COMPUTER MANUAL PROFESSIONAL

These work in conjunction with the bus switches on the channel strip. Your tape inputs and serve double duty as both direct outs and group bus outs. Project 8 employs an elegant floating-bus scheme, which allows you to record usingĭirect outputs or the group bus, without repatching. The monitor section, and whatever is plugged into the monitor/tape inputs will now Whatever is connected to the mic or line inputs will now be routed to Pressing the Flip button reverses the channel and monitorĪssignments. Will normally connect your tape returns here, but you can connect any other Jack is routed by default to the monitor input section on the channel strip. Jack (post-EQ) allows you to process each channel individually. Into the mic or line jacks is by default routed to the channel input. One source should be plugged into these jacks for each channel. ThereĪre separate mic and line input jacks, but as there is no mic/line switching, only TRS, requiring Y-cables for sends and returns.Įach channel has five jacks: mic, line, insert, monitor/tape in and tape out. The mic inputs are XLRs all others are 1/4-inch phone jacks. Switches allow routingĪux 3 to the Aux 5 output and Aux 4 to the Aux 6 output.Īll of the jacks, except for headphone and talkback, are located on the back of Auxes 3 and 4 are post-fader sends and canīe switched for use with either the Channel or Monitor input. Pre-fader channel send, and Aux 2 is a pre-fader monitor send unfortunately, theseĬannot be switched for post-fader use.

Send outputs, but only four can be used on a channel at a time. The aux section uses a four-of-six arrangement, meaning that there are six aux A dedicated 2-band EQ devoted to the Monitor inputĬonsists of high-/low-shelving EQs (80 and 12k Hz), both with a +/-15 dB range. All EQ has a +/-15dB range and a center detent. MF1 EQ is sweepable from 350 to 8k Hz, and the MF2 EQ is The channel EQ section has a high-shelving band at 12 kHz, low-shelving at 80 Hz,Īnd two swept-mid EQs. The gain pot has a 10dB to 60dB range for mic and a -20dB to 30dB range for Starting from the top of the input channel, the Project 8 has a scribble stripĪnd switches for phase reverse, phantom power, flip and bus (more on flip and bus Tracking/overdubbing and for sending any other line input source to the 2-track Recorded tape tracks (or virtual MIDI/workstation tracks) during The Monitor can be used to monitor previously , the Channel is used for recording live tracks during tracking and overdubbing andįor tape tracks during mixdown. The Project 8 has two inputs (Channel and Monitor) for each channel strip. In 24- and 32-channel (48- and 64-input) versions. The Project 8 is an analog 8-bus mixer designed for multitrack recording that comes Other than these and a few other minor alterations, there are no majorįeature or performance changes between the discontinued Topaz and the new Topaz

TOPAZ STUDIO COMPUTER MANUAL PROFESSIONAL

More professional look, and bushings have been added to the knob shafts, providingĪ solid feel. Garish pastel knobs of the original Topaz have been replaced with dark knobs for a (Nextel resembles a 'fuzzy' paint look.) Additionally, the The body of the Project 8 is now aĭark gray Nextel finish. The Soundtracs Topaz Project 8 replaces the original Topaz mixer, but the changesīetween the two consoles are largely cosmetic. This jumpstarts the connection.First here's an original Independant REVIEW of TOPAZ 8 / PROJECT In Photoshop go to Filters → Topaz Studio 2. If it doesn’t appear, open Topaz Studio 2 directly to ensure it’s working. When I installed Topaz Studio 2 it automatically appeared in my Photoshop Filters. And, it’s right beside the original file. Topaz places your new image in Lightroom.

And, the fun that you started in Lightroom continues in Topaz. Then, access the plug-in by going to Lightroom’s main menu: Photo → Edit In → Topaz Studio 2.

TOPAZ STUDIO COMPUTER MANUAL HOW TO

How to Access from Lightroom’s Main Menu:Īfter you install Topaz Studio 2, you’ll select an image in Lightroom. Click the preset dropdown menu and choose “save current settings as a new preset” and type the name of your application.Select the Topaz Studio 2 Icon (not the folder!).Under the Additional External Editor Section, under Preset you will select Choose.From the Lightroom menu: Preferences → External Editing.If you don’t see this (don’t worry, I didn’t either) then you’ll connect it directly within Lightroom using the 4 steps below. Open Lightroom and go to the main menu and select: Photo → Edit In → Topaz Studio 2.

Topaz studio computer manual